This universal timing pulley puller is ideal for removing pulleys and camshaft sprockets without causing any damage. This tool is adaptable to different pulley diameters thanks to its adjustable gripping arms. The timing pulley puller is made of high-strength carbon steel for sturdiness and durability.

This timing tool kit, professional for commercial or occasional use, is ideal for locking the camshaft and crankshaft when chasing the timing belt or repairing the engine. It is essential for timing belt replacement on Renault / opel / Vauxhall / Suzuki / Mitsubishi / dacia and Nissan models!Made of hardened and tempered steel, this tool kit will bring you maximum strength and durability for years of use. All tools are well stored in a sturdy case for easy transport.Delivery includes:1 pc locking tool for camshaft inlet to use as Opel KM - 6205 and Renault MOT15341 pc locking tool for camshaft outlet to use as Opel KM - 6204 and Renault MOT15371 pc belt tensioner to use as Renault MOT15431 pc clamping screw M6 x 1,01 pc high-pressure pump fixing to use as Renault MOT15381 pc cam lo

This grease gun adaptor kit consists of adaptors and extensions to make almost any lubricating job easy. It is designed for use with all leading brands of manual grease guns. Delivery includes: 90 degree lube tube, straight extension, 400 mm hose extension, slide on 90 degree coupler, rubber tipped nozzle, needle nozzle and a 360 degree coupler.All tools are neatly packed in a sturdy case for easy transport.

The easy-to-use brake rewind tool is compatible with most popular car brands. It is truly indispensable if you want to replace your brake pads. By using this tool, you can prevent damage to the gasket. This set consists of 1 right handled spindle, 1 retainer plate, as well as 11 adapters for various brake system. Additionally, it comes in a sturdy blow moulded case for easy storage and transport.

This bearing race and seal driver set will be ideal for wheel bearing race and seal installation without damage to the brace and axle housing. The toolkit has been crafted from heavy-duty aluminium for added strength and durability and its high-quality finish ensures that the bearing will not be marred during use. The universal kit includes 9 drivers in different sizes to fit most standard wheel bearings. The tapered sides of drivers are used for installing races and the flat sides for the seals. The solid handle has a knurled surface for better grip. Delivery includes 1 handle and 9 drivers in different sizes (39.5/44.5/50/59/63/65/72/76/81 mm). All pieces are neatly organised in the included carrying case.

This is a diesel fuel pump timing set. It is suitable for timing distributor type diesel fuel pumps on engines fitted with Bosch, VE, Kiki, Lucas, CAV-Rotodiesel, NiponDenso. Made of high-quality material, this tool set is very durable. The kit is delivered in a blow molded case for easy storage and transport.

This Brüder Mannesmann ball-bearing puller set is an ideal tool for professionals. The puller set has three pullers (75 mm - 2 arms, 100 mm - 3 arms and 150 mm - 3 arms) with zinc-plated surfaces.

This pneumatic dent puller is an essential tool for pulling out dents from vehicles. The dents on cars can be simply removed by placing the suction cup over the dent on the panel and using the built-in slide hammer.This large dent puller, with pneumatic control, creates a super-strong vacuum, making it easy to pull dents out of panels. Our pneumatic dent puller is durable for years of use.

This user-friendly lube kit contains adaptors and extensions to make almost any lubricating job easy and clean. Made of heavy-duty iron, these tools are built for last. Hose extension provides flexibility to tools with rigid extensions. Needle nozzle allows operator to contact flush type or hard to reach hydraulic type fittings. All items are packed in BMC for easy storage and transportation. This lubricating kit will be a great helper when you working on garage greasing jobs.

This comprehensive timing tool set of over twenty tools enables the correct engine timing to be made when replacing the timing belt. This set is suitable for use on most popular cars with petrol or diesel engines.This tool set is made from highly polished steel which is hardened and tempered for durability. All tools come in a blow molded case for easy storage and transportation.Delivery includes timing pins, crankshaft locking pins, camshaft setting tool, mounting bracket and camshaft gear alignment tool.

This spring compressor is designed to compress almost anytypes of Macpherson style coil springs in the front and the rear. Three sets ofinterchangeable jaws (65 to 125mm, 88 to 160mm, 125 to 215mm) are provided tofit springs found in most automotive applications.You can compress the spring effortlessly in a safe linear method by simply tightening the nut on the compressor body by hand. All tools are packaged in a molded storage case for easy transportation.

This 23-piece rim lock socket set contains 22 dismantling sockets in different sizes and 1 protective impact sockets. It is designed for removing or installing the rim locks on most VAG vehicles. Made from chrome molybdenum steel, these tools are exceedingly sturdy and durable. All pieces are delivered in a handy blow-moulded case for easy storage and transportation.

This 21-piece ball joint adapter tool set is extremely stable and has a high-quality construction which ensures a long life for everyday use. Suitable for pressing ball-bearing joints and steering knuckles with the pitman arms, control arms and stabilizer bars. This set includes all necessary sleeves and plungers to change the ball joints. Also included is a handy case for safe storage and easy transport.

This rod remover tool is a universal tool designed to remove and mount inner tie rods on vehicles. It grips inner tie rod ends that have no, incomplete or inaccessible wrench-flats. This rod end remover automatically adjusts to service inner tie rod ends with body diameters from 35-mm to 45-mm.Long shaft tube helps keep wrenches from damaging auto body. Narrow profile allows easy use in confined spaces.

This user-friendly 18-piece injector removal/installer and service tool kit is specially designed for petrol injectors installed in VAG (Audi/Seat/Skoda/VW) covering 1.4/1.6/1.8/2.0/2.7 V6/3.0 V6/3.2 V6/3.6 V6 & 4.2 V8 FSI engines. These components are manufactured from high-quality steel for strength and durability. Adapters come with knurled rings for use in oily conditions. Additionally, all pieces are delivered in a blow-moulded carrying case for easy transport and storage.

This injector puller tool set with high quality allows the removal of sized injectors without the need to remove the cylinder head.The bridge fits perfectly on the cylinder head, which will prevent damage to the area surrounding the injector.This tool set is crafted by hardened and tempered carbon steel, ensuring its maximum durability for years of use. All tools are well stored in a sturdy case with foam insert for easy transport.

This wheel bearing removal and installation tool set will be a great choice for the fast and effective removal and installation of wheel bearings on front-wheel drive vehicles. It makes assembly quite easy, as it eliminates the need to remove the steering knuckle and strut. Made of high-quality material, this wheel bearing removal & installation tool set is very durable. The kit is delivered in a blow-moulded carrying case for easy storage and transport.

This diesel injector puller tool set allows the easy and quick removal of diesel injectors. The injector puller set is crafted from high-quality steel, ensuring excellent durability. All tools are delivered in a sturdy case for easy storage and transportation. Delivery includes 4 adaptors, 4 slide hammers, 5 nuts, 2 jaws, 2 pullers, 1 spot weld cutter, 12 screws, 1 extractor tool, 4 snap rings, 1 shaft, and 5 sockets.

This clutch alignment tool is used to center the clutch disc perfectly under the pressure plate, which is bolted to the flywheel. With the use of the tool it will be much easier to align the splines in the clutch disc with the pilot-bearing hole in the flywheel. This clutch alignment tool set prevents plate distortion and avoids the clutch from disengaging or cause dragging. A refitting tool is also included, with which you can wind back the clutch. Manufactured to a high standard, the set is very durable and suitable for professional use. The kit is delivered in a blow moulded case for easy storage and transport.

This oil drain pan has a capacity of 16 litres and will be ideal for draining used engine oil. It is an ideal solution for keeping garage or workshop floor clean while changing oil. This oil drip tray is also suitable for motorcycles. The waste oil collector has a durable plastic construction and is resistant to most solvents (temperature < 60°C) such as acids, alkaloids, alcohol, oil, petrol, etc. The large carrying handles and spout make pouring out the oil easier, while the high rim prevents splashing.

This SAC clutch alignment tool set is designed for the fast and professional disassembly and assembly of SAC clutches. It fits on nearly all SAC clutches with a 3- and 4-hole pitch from VAG, MB, Opel, Volvo, Renault, etc. This set is an indispensable workshop tool for professional and DIY mechanics alike. The tools are highly durable as they have been constructed from high-quality materials. The set is delivered in a blow-molded case for easy storage and transport.

This superb oil drain plug repair kit consisting of 4 taps, 20 oil drain plugs and 40 aluminium washers supplied in a blow mold case is great for repairing sump, gearbox and differential plug threads. This kit provides new enlarged thread and replacement drain plug screws for use when existing threads are damaged or worn away. It is suitable for most threads used on cars and light commercial vehicles such as Audi, VW, BMW, Citroen, Fiat, Ford, Seat, Honda, Mazda, Mitsubishi, Opel, Peugeot, Renault, Toyota and Volvo. Made of high quality materials, the kit is designed for long life in daily workshop use. And all tools are supplied in a blow mold case for easy storage and transportation.

This DSG clutch removal / installation tool set is an indispensible workshop tool for professionals and DIY mechanics alike. It is perfect for professional use due to its superior quality, comprehensive features and convenient storage case. This dual-clutch transmission tool set is suitable for vehicles with a 7-speed transmission gearbox (code 0AM), for example the 2004 VW Golf and the 2005 VW Golf Plus, Audi built after 2004; as well as for 6-speed transmission gearboxes (code 08D), for example the 2003 VW Touareg. Made of high-quality material, this DSG clutch removal / installation set is very durable. The kit is delivered in a blow-moulded case for easy storage and transport.

Our user-friendly 16-piece spark plug thread repair tool kit will definitely be a good helper for repairing damaged spark plug threads with a size of M14 x 1.25 mm, prolonging spark plugs service time. The tool set is supplied with spark plug thread inserts in different sizes for various needs. With the included tap, you can enlarge the spark hole to fit the sleeve. The tool kit is made from high-quality steel for strong strength and long durability. Additionally, all pieces are delivered in a blow-moulded carrying case for easy transport and storage.

This Rear Axle Bearing Sub Frame Tool Set, made of quality carbon steel, is an essential tool set for the mechanic and is suitable for Renault & Laguna. It is designed for replacing the sub-frame bushing and for disassembly and assembly of the rear axle. Without causing damage, the fine thread and thrust bearing allows the pressure sleeve to be fitted quickly and easily. All tools come in a blow molded case for easy storage and transportation. And the molded plastic storage case is well designed for a long life in daily use. Complete set includes 1 pressure sleeve, 2 pressure pieces, 1 spindle and 1 molded plastic storage case.

This is a comprehensive tool kit for locking camshaft when checking / adjusting camshaft timing, replacing inlet camshaft or timing chain on BWM M40/42/43/44/50/52/54/56.Made in highest-quality, this engine timing tool kit is designed for long life in daily workshop use and categorized into industrial grade.All tools are sorted it in in a blow molded case for easy storage and transportation.

This specific alternator tool kit has special bits for the installation of the drive pulley. The drive pulley is attached by 33-tooth inserts. The set includes all necessary sleeves and plungers to change the bearing-ball joints. The included inserts are suitable for special operation on Bosch and Renault alternators. This alternator toolkit contains adapters for VW, Audi, BMW, Mercedes and Ford.

This professional fuel injection pressure tester kit includes adapters, hoses, clamps and fittings, which is applicable for mechanical and electronic gasoline injection systems and most cars and trucks worldwide. It has a high pressure double scale gauge display 0-140 PSI or 0-10 bar for accurate oil pressure check. This set includes comprehensive kit of adapters and accessories for modern injection systems. Components are equipped with a quick release system and safety valve to prevent accidental discharge of the fuel under pressure. Made of quality material, this tool set is exceedingly durable. Additionally, the kit is delivered in a blow moulded case for easy storage and transport.

This 11-piece piston ring service tool is durable enough to withstand day-to-day professional use in the workshop, but is also ideal for hobby mechanics. The tool kit contains piston ring compressors with a self-locking ratchet that prevents premature release and ensures a positive lock. The piston ring pliers can be used for the easy release of piston rings. A piston ring cleaner with three blades is also included. Made of high-quality materials, this tool set is very durable. The tools are delivered in a blow-moulded case for easy storage and transport.

This tension gauge is for adjusting the tension of drive belts where the movement of the timing belt is measured by load (daN) (1daN = 10N). The tool is suitable for belts with various serpentine and thicknesses.Its adjustable dual scale graduations is readable from front and back of tool.Made from hardened steel with a smooth rolling screw action and knurled grip edge for maximum grip and durability.

With this universal alignment tool, your alignment work will be easy and effortless! The tool allows the clutch plate and the pressure plate to be assembled on the bench, making clutch changes a one-handed operation. It is suitable for most cars and light commercial vehicles and also for flywheels without guide bearings.

This slide hammer puller for mechanics is great for general automotive work like pulling hubs, axles, bearings and so on. It can also be used for removing dents. It will be indispensable for professionals and DIY mechanics alike. The puller includes a 5lb malleable steel sliding weight, which gives you a quick, precise pull in tight areas. The tools are highly durable as they were constructed from high-quality materials. The kit is delivered in a blow-molded case for easy storage and transport.

The easy-to-use brake rewind tool is compatible with most popular car brands. It is truly indispensable if you want to replace your brake pads. By using this tool, you can prevent damage to the gasket. This set consists of 1 right handled spindle, 1 retainer plate, as well as 10 adapters for various brake system. Additionally, it comes in a sturdy blow moulded case for easy storage and transport.

This brake caliper wind back kit contains all tools required for brake pads replacement. It is compatible with almost all types of vehicles. Supplied with left and right handed thrust bolts, this tool kit allows you to rotate the pistons back into the caliper providing clearance for new brake pads. At the same time, it will keep the gasket free from damage. This tool kit is crafted by hardened and tempered carbon steel, ensuring its maximum durability for years of use. All tools are well stored in a sturdy case.

This high-quality universal radiator pressure tester kit consists of 18 pieces, and will be an ideal workshop tool for car enthusiasts and automotive professionals alike. This radiator pressure tester kit will help you find internal and external leaks in your cooling system. This tool kit allows you to change the coolant and test for leaks in the vehicle's cooling system, including the radiator, heater core and radiator cap, in a simple and straight-forward manner. Made of high-quality material, this pressure tester set is very durable. The kit is delivered in a blow-moulded case for easy storage and transport.

This 3-in-1 Ball Joint C Frame Service Kit is excellent for removal and installation of press-fit parts such as ball joints, universal joints and truck brake anchor pins. It is also perfect to remove rusted and corroded parts.This kit contains heavy-duty C frame press, receiver tubes and installation and removing adapters. All tools are neatly packed in a sturdy case for easy transport.

This cylinder leak detector set quickly diagnoses internal engine problems suchas bad rings, valves and leaking head gaskets. The dual gauges feature metalbezel with rugged rubber protective outer boot. Input gauge scales read 0-100 psi,second (measuring) gauge measures in % leakage. This leak-down gauge reads 0 to100% leakage in 5% increments. The easy-to-read gauges are designed for proper testing and accurate results.This leak detector set is suitable for use on any petrol engine with 12or 14mm spark plugs. It can be used for almost all cars, motorcycles and trucks. All tools come in a blow molded casefor easy storage and transportation. Delivery includes pressure gauge, cylinder leakage gauge, 2 x spark plug adapter, quickconnect/disconnect hose and regulator.

Our stainless steel paintless dent repair set will remove dings and dents in your vehicle without damaging the paint job. Using this paintless dent repair tool set will not damage your car like other methods. Dents are removed from the backside of the panel so you won't have to sand, use paint fillers (body putty), or repaint. No panels will need to be replaced or painted, saving you the hassle of blending just the right paint colour to match the adjacent panels. Made of heavy-duty stainless steel, the dent repair set is exceedingly durable, ensuring a long service life. Paintless dent removal is a delicate process and always demands the best tools, so this set will be a great choice. The set includes 8 paintless dent repair rods. The set is delivered in a storage bag for easy tran

This wheel hub bearing tool set is designed to evenly distribute pressure on the outer bearing race, and also allows for the suspension leg to remain in place on the vehicle when fitting new wheel bearings. It is suitable for certain models of Ford, Land Rover and Volvo. Made of high-quality material, this compact wheel hub bearing tool set is very durable. The kit is delivered in a blow-moulded carrying case for easy storage and transport.

This set of ball joint separators is used for quick and easy separation of ball joint connections. It is also useful for splitting track-rod ends and anti-roll bar mountings. Made of high-quality carbon steel, the pullers will be a dependable asset to your workshop. Delivery includes 2 ball joint separators.

This master set allows you to build your own custom bushing driver, really a must have for garage and DIYs. It has every size you will ever need for most vehicles. No need to take the trouble to find a socket that close to the size of your bearings any more. With this kit at hand, you will just need to select the required sizes and then assemble your drivel tool, thus to get the job done promptly, efficiently and professionally. The plates can be used manually with a hammer / handle or with hydraulic presses.Made of special carbon steel with black oxide, the kit is designed for long life in daily workshop use. And all tools are supplied in a blow mold case for easy storage and transportation.

This engine timing tool set is designed for professional engine repairs, for example, the installation and removal of camshafts, replacement of timing chains, checking and adjustment of the camshaft timing, renewal of the cylinder head gasket, etc. Manufactured to a high standard, this set is durable enough for daily use in the workshop. This timing tool set is delivered in a blow moulded case for easy transport and storage.

This thread repair kit is used to repaire or replace damaged or stripped internal screw threads.The kit has altogether 131 pieces, all made according to professional standard.It has one HSS tap for each size, one HSS drill for each size, 2 insert tools for each size, thread inserts for each size, all come complete in a handy storage case.Delivery includes 5x HSS steel drill,5x HSS steel tap,5x inserting tool,5x tang break, and110x steel threaded inserts in a carry case.

This car tool set is used for replacing the trailing arm bushings, as well as trailing arm in wheel carrier bushing. The trailing arm bushing tool set is suitable for BMW Models 1 and 3 from 2004 to 2012 series, including E81, E82, E83, E85, E86, E87, E88, F20, E90, E91, E92, E93. It will be an indispensable workshop tool for professionals and DIY mechanics alike.

With our dent puller welder kit, bumps and dents in bodyworks can be repaired effectively. It is the perfect tool set for professional workshops, car painting shops or workshops at home. This spot welding gun kit includes 20-pieces tools, allowing you to repair a wide range of problems of your car. The slide hammer is made from carbon steel and is placed on the bodywork so that the dent puller pulls out bumps and dents effectively and effortlessly. The robust triangle head makes it possible to pull out even severe dents thanks to the slide hammer's high pulling force. You can save time and money while repairing bodyworks, through simple handling and the car repair tool's direct usage.

This nine ways slide hammer puller set is ideal for many automobile works, such as pulling flange-type rear axles and front-wheel drive hubs. This nine ways slide hammer puller set is also designed for use with other 5/8" - 18 thread slide hammer attachments. All tools are well stored in a sturdy blow-moulded case for better storage.

This camshaft alignment timing tool set includes all the necessary tool to timing on BMW M52 M54 M60 M62 E46 engines. This tool set is made of heavy-duty steel and lightweight aluminium which are highly durable. The camshaft alignment timing tool kit will be an indispensable device when you set and check the engine. A carry case is also included in delivery for easy storage and transport.

Get your engine timing prefect with our engine timing tool set. The tool set is suitable for most VAG cars. Made of heavy duty carbon steel material, the tools are exceedingly sturdy and durable, ensuring a long service life. All pieces are delivered in a handy blow-moulded case for easy storage and transportation.